Press and hold CENTER and + buttons for approximately 3 seconds to enter advanced menu.Note this does not apply for the RTH6330.īrightness options and Brightness levels are in the ISU settings. Setup Step 300 needs to be set to 1 for Auto System Change Over How do I adjust the screen brightness on my TH6210U2001, TH6220U2000, TH6320U2008? To save and exit early, press Home to return to the Home screen. Once you have cycled through all of the System Setup numbers, “Done” is displayed.Press Select to save changes and advance to the next System Setup number.Press + or – to change values or select from available options.Press Select to cycle through System Setup numbers.Press Select to enter System Setup (ISU) menu.Press and hold Menu and + buttons for approximately 5 seconds to enter advanced menu.Note the RTH6360 does not have a keypad/screen lock/unlock feature How do I enable auto change over on the RTH6360? Press Back to go back a step to enter the correct number and press Select.
#Number press manual code
If the code is incorrect, the screen will flash the lines “”–“”.
Once all four numbers have been entered, press Select again. Repeat this process to enter the second through fourth digits of the number. To enter the password, press + or – to change the first digit of the number.
#Number press manual full
The thermostat has 3 settings for the screen lock: Unlocked, Partial Lock, and Full Lock The RTH6360 will operate a heat pump, including a heat pump with backup heat. Setup Step 300 needs to be set to 1 for Auto System Change Over Is the RTH6360 Heat pump compatible? 4 Press + or – to change values or select from available options.ĥ Press Select to save changes and advance to the next System Setup number.Ħ Once you have cycled through all of the System Setup numbers, “Done” is displayed.
0 kommentar(er)
